|
|
|
[Ignore the lousy stencil job in the photo above!] 1. If you have ANY questions concerning this plane, please see the Message Board as you will most likely either find an answer there, or you can post a question and usually get it answered quickly. 2. When using Hot Glue, use the HOT setting on your glue gun. Make sure you have something like a 4 x 4 piece of wood or other long, heavy object to push down on the areas to be glued so that you get the glue spread out thinly. In the case of hot glue, thin beads spread evenly are much better than thick beads spread haphazardly. The goal is to get the hot glue to smear thinly to both surfaces. In some cases, you may wish to use a heavy staple gun to staple the trailing edges of the wings. Also, you may wish to not use hot glue at all and use something like CA glue, Household Goop, or Liquid Nails.
|
|
Last Updated:
10.09.2006 The site that started it all: Spadtothebone.com
|
